Export Control Studio
PlansAccount
Account
Menu

ECCN reference · Category 1: Special materials and related equipment, chemicals, microorganisms and toxins

ECCN 1C107

Graphite and Ceramic Materials, Other Than Those Controlled by 1C007, Which Can be Machined to Any of the Following Products as Follows

Materials. Reasons for control: MT (Missile technology), AT (Anti-terrorism).

Does 1C107 need a license to your country?

Enter the full classification (for example 1C107.a.1) and a destination. The check reads the Country Chart, the end-use and embargo rules, and shows the rule and source behind the answer.

License requirement check

Item classification and destination. No account needed.

An ECCN (such as 5A992.c) is an exact match and works best. Word search matches the official CCL wording and a reviewed list of everyday names as you write them; it does not guess what you mean or fix spelling. Don’t know the ECCN? Use Find the ECCN.

License requirements

Each control below comes from the entry’s License Requirements table. Where it names a Country Chart column, the countries with an X in that column need a license for the items the control covers, unless a License Exception applies.

  • MT (Missile technology): MT applies to entire entry.
    Country Chart column MT1: a license is needed to 193 countries with an X

    Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Austria, Azerbaijan, Bahamas, The, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Democratic Republic of the), Congo (Republic of the), Costa Rica, Cote d'Ivoire, Croatia, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini, Ethiopia, Fiji, Finland, France, Gabon, Gambia, The, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Korea, South, Kosovo, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia (Federated State of), Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, North Macedonia, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (the Dutch two-fifths of the island of Saint Martin), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Republic of, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sudan, Suriname, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkmenistan, Tuvalu, Türkiye, Uganda, Ukraine, United Arab Emirates, Uruguay, Uzbekistan, Vanuatu, Vatican City, Venezuela, Vietnam, Western Sahara, Yemen, Zambia, Zimbabwe.

  • AT (Anti-terrorism): AT applies to entire entry. No Country Chart country has an X in column AT1; the destinations this control targets are under “Not decided by the Country Chart” below.

Not decided by the Country Chart: Covered Donetsk region of Ukraine (DNR), Covered Luhansk region of Ukraine (LNR), Crimea region of Ukraine, Cuba, Iran, Korea, North, Syria. These destinations are under embargoes or other special controls in 15 CFR Part 746, which require a license for most items whatever the chart shows. Russia and Belarus also have broad Part 746 controls in addition to the chart.

A blank on the Country Chart is not permission to ship. End-use and end-user rules (15 CFR Part 744), embargoes and sanctions (Part 746), and the parties to the transaction still apply. Use the check above for your item and country.

List-based License Exceptions

As the entry lists them. Each exception has its own conditions in 15 CFR Part 740, and § 740.2 bars or limits most of them for Russia, Belarus, Country Group D:5 and embargoed destinations, so an entry’s “Yes” does not mean it is available everywhere.

  • LVS: N/A
  • GBS: N/A

Items in 1C107

The controls often apply to some paragraphs only, so check the full paragraph, for example 1C107.a.

Show all 10 paragraphs
  • 1C107.a Fine grain graphites with a bulk density of 1.72 g/cm^3 or greater, measured at 15 °C, and having a grain size of 100 micrometers or less, usable for rocket nozzles and reentry vehicle nose tips as follows:
  • 1C107.a.1 Cylinders having a diameter of 120 mm or greater and a length of 50 mm or greater;
  • 1C107.a.2 Tubes having an inner diameter of 65 mm or greater and a wall thickness of 25 mm or greater and a length of 50 mm or greater;
  • 1C107.a.3 Blocks having a size of 120 mm × 120 mm × 50 mm or greater.
  • 1C107.b Pyrolytic or fibrous reinforced graphites, usable for rocket nozzles and reentry vehicle nose tips;
  • 1C107.c Ceramic composite materials (dielectric constant is less than 6 at any frequency from 100 MHz to 100 GHz) for use in radomes useable in rockets, missiles, and unmanned aerial vehicles capable of achieving a "range" equal to or greater than 300 km; or
  • 1C107.d High-temperature ceramic materials, useable in rockets, missiles, and unmanned aerial vehicles capable of achieving a "range" equal to or greater than 300 km, as follows:
  • 1C107.d.1 Bulk machinable silicon-carbide reinforced unfired ceramic, usable for nose tips.
  • 1C107.d.2 Reinforced silicon-carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps.
  • 1C107.d.3 Bulk machinable ceramic composite materials consisting of an 'Ultra High Temperature Ceramic (UHTC)' matrix with a melting point equal to or greater than 3000 °C and reinforced with fibers or filaments, usable for missile components (such as nose tips, re-entry vehicles, leading edges, jet vanes, control surfaces, or rocket motor throat inserts).

Source

Commerce Control List, 15 CFR Part 774, Supplement No. 1 (official text on eCFR), as of August 21, 2026, 1:45AM EDT. Commerce Country Chart, Supplement No. 1 to Part 738, as of August 21, 2026, 1:45AM EDT.

This page is a preliminary reference, not legal advice, a classification ruling or permission to ship. Confirm the classification against the full official text.